Cox-Internet-Connection

Decision making

Sales: Mike 623-328-3539 cox business

• Account number= 1906488-01

59 USD/month 2M down 384K up

79 / month 4 512

99 / 7 768

139 10 1 meg

179 12 1.5

229 15 2

• one static IP address = 98.172.65.195
• comes with modem
• can get separate cable
• business service minimum of 1 year
• installation cost = 45 dollars

• gateway= 98.172.65.193
• network mask=255.255.255.240
• primary DNS= 68.105.28.11
• secondary DNS= 68.105.29.12

Service Modulation of cost

• cost can be modulated down to 59 * 12 = 708 per year?

Modem Information

• Technical support Phone= 623-322-2000

• Installers Number: Jacob : 480-222-7190 #72037

Modem IP address=http://192.168.100.1/

• Name: WebSTAR DPC2100R2
• Modem Serial Number: 218173697
• Cable Modem MAC Address: 00:22:3a:50:2b:04
• Hardware Version: 2.1
• Software Version: v2.0.2r1256-060303
• Receive Power Level: -6.9 dBmV
• Transmit Power Level: 43.5 dBmV
• Cable Modem Status: Operational

Router Information

WRT54GL wireless router flashed to Tomato Firmware

• Router LAN IP Address = 192.168.1.1 - set to this to avoid conflict with other router when connected to same computer for administration

Account Information

• 001-8501-190648801

• PIN= 3644

account page: sales@embeddedrf.com hawaii50

• what is your favorite sport or hobby? sex

Computer direct to Router Test SetUp

Computer(pequena) wired adapter MAC address = 00-0D-60-C4-61-42

Using the above settings in the TCP/IP setup panel the connection works. Router was not even seen by the technician at Cox.

• The computer was even before correct settings where dialed in
• The results of the WhatIsMyIP query shows results that agree with IP address of the account

Router Setup: per Cox point of view Summary

• one static IP address = 98.172.65.195
• gateway= 98.172.65.193
• network mask=255.255.255.240
• primary DNS= 68.105.28.11
• secondary DNS= 68.105.29.12

Clone computer MAC address: Computer(pequena) wired adapter MAC address = 00:0D:60:C4:61:42

Specific Router Setup: WRT54G with linksys firmware

Router Remote Access

• http://98.172.65.195:8080
• router pw = 1234512345 ( both for administration and wireless key )

Server Information

Groucho

• eth0 MAC address= 00:E0:81:34:83:74
• eth1 MAC address= 00:E0:81:34:83:75 - this is the left hand side ethernet port. Used this for network connection

• connected with fixed LAN ip = 192.168.1.50 - out of the range of DHCP server

Cox Blocks port 25 direct connection to recipients server

Why they block port 25