Temperature-Controller-Specification

Temperature Controller Specifications

Temperature controller specs

• Controller Type = PID

• Multiple input types: Must work with K type
  • good if works with following types also: R,S,K,J,T,E,RTD,L,U

• Temperature range with K thermocouple = 2300 deg F

• Prefer to be able to choose Fahrenheit or Celsius

• serial communications
  • prefer zascii over modbus
  • prefer model that has both RS-232 and RS-422 communications option

• Output Type:= SSR output drive pulse PWM on / off modulation

• dual display if possible

• write only to RAM unless I specify NVRAM when I set the desired temperature

• Form Factor: 1/16 or 1/4 DIN

• Power= 100 - 240 VAC input power

Documentation needed

• 1- operation manual

• 2- communications protocol manual

Added desirables

• 1- 232 to 422 converter

AOB808 Juliana Chu - CNAOB

AOB808 ① ② ③ ④ ⑤

• 1- Dimension code designation of the instrument panel
  

A:96× mm D:96 72×72mm E:48×96mm F:96×48mm
G:48×48mm H:160×80mm S:80×160mm

• 2- type of the module installed at OUT, 0 for no module installment
  

• 3- type of the module installed at AL1, 0 for no module installment or no AL1
  

• 4- type of the module installed at AL2, 0 for no module installment or no AL2
  

• 5- type of the module installed at AUX, 0 for no module installment
  
  

Selection

Part Number = AOB808-AG00S

• 1- size = 96 X 96 mm => 1/4 DIN .....

• 2- output type = G .... SSR driver

• 3- alarm 1 output type = 0 ....NONE

• 4- alarm 2 out type = 0 ...NONE

• 5- Aux ... RS-485 ... type= S