Marks-Back-Gate-Project

From *** My Personal Wiki ***
Revision as of 12:24, 18 February 2010 by 72.208.182.51 (talk) (New page: == Notes on existing back gate == Brick wall is 70 inches tall slats are tongue in groove > 5 inches wide '''Small Gate''' *side hinge anchors are 2X4 that are XXXXX???? inches tall ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Notes on existing back gate

Brick wall is 70 inches tall slats are tongue in groove > 5 inches wide

Small Gate

  • side hinge anchors are 2X4 that are XXXXX???? inches tall > set flat on the surface of brick
  • uses qty=4 5 inch wide slates with one slat 9 inches wide
  • OverAll width = ????
  • gate uses

Big Gate

  • side hinge anchors are 2X4 that are 67 inches tall > inset into brick wall
  • OverAll width = ????


Replacement Materials

  • Cedar Slats > 72 inches tall > 5 3/8 inch wide
  • 2X4 > ??????


Estimate of materials needed

  • Number of Cedar slats
  • Lengths of 2X4
Retrieved from "http://wiki.amarketplaceofideas.com/index.php?title=Marks-Back-Gate-Project&oldid=3709"